Thursday, November 29, 2007

Fireplace

Seems like there is a sequence to everything. So to get to the final goal there are many steps, yet no progress can be made until we check off each task along the way. It's exasperating at times.

We have a two-story fireplace that was re-stuccoed during our remodel last year. Pictured is the downstairs fireplace-in the den where we have a TV and sectional. Before and after pics. Nice improvement huh?
So now, we had to get the chimney sweep to come. So that took a while.

Then we went to look at fireplace doors. Well, this became complicated. See the cut-out? So the door opening isn't exactly rectangular? This meant either a) we got an expensive custom door or b) we retrofitted the opening so that it was squared off. B was preferred as it would be to code, safer for the kids, and would help insulate this room in winter and keep it warmer (on the average cold winter day it is about 5 degrees cooler in this room than the rest of the house).

So we had a firm come in to bid on this little project. Then a subcontractor "fireplace guy" came over. Wouldn't touch the project, couldn't figure out why - thought it was because I was orchestrating this and these are "men's men" e.g. I wasn't in the "club" therefore not worthy of the job.

Went back and forth. Finally had the stucco contractor come in to do it. Seems the problem was, the hearth is beautiful yet fragile marble. This guy was mortified that they would cut into the brick and the hearth would break! Ahh-now this is making sense. But the lack of communication of the supposed real reason mystifies me.





So finally this week we got to this point. Before and after. Opening nicely squared off now.


But we're not quite there yet! There's some cement patching needed in the grooves and openings made when they cut out the brick.

Then the doors can be ordered and installed.

And all I wanted was to be able to have a nice fire. Not so simple it seems.

5 comments:

MikeN said...

Hi! We are thinking of restuccoing our painted brick fireplace just like yours. I'd like any additional information you could provide. Here's a couple of questions off the top of my head: Did you do this yourself? Did you remove the paint prior to applying stucco? Did you use wire mesh? Did you tint the stucco or paint after? Thanks in advance! -Mike

thismngardener said...

Hey Mike-
We hired this out. They chipped off only the mortar that stuck out the most. There was no need to re-paint, nor to clean or treat the original surface in any way.
Then they squared off the corners & covered with wire mesh. Then stuccoed over it. We selected the color and the style (roughness) of the stucco. The stucco comes in many, many colors. We will also be able to paint this surface in the future.
Resurfacing only cost us a fraction of an inch. This was especially important to us, because we have a racetrack ceiling. I have some pics of the wire mesh that i will put up over the weekend. Hope that helps!!

MikeN said...

Great! Thanks for the additional information. I look forward to seeing any additional pics of the project that you have.

MikeN said...

Great! Thanks for the additional information. I look forward to seeing any additional photos you have of the refacing project.

MikeN said...

Hi again! I was just checking in to see if you had any additional photos that you could send or post. Thanks and Happy Holidays!
-Mike